-
Introduction
QL-Interface Agent For Ceramic Tile improves the physical properties and surface chemical properties of the material surface by adsorbing and covering the surface of the tile or marble, and lastly achieves the purpose of changing the physical and chemical properties of the tile or marble interface. The marble and the tile treated by QL-Interface Agent For Ceramic Tile, it can form good adhesion with various coating.
-
Features:
1. Two-way penetration bonding produces a radioactive chain anchoring effect to permanently and firmly bond two-way materials together.
2. It has good air permeability, freeze-thaw resistance, water-resistance, anti-aging, no-pollution and it is environmental protection product.
3. It can be constructed and hardened in a humid environment and easy to use.
4. It has a good compatibility with various types of coatings and can be used for coating interface treatment.
-
Application Range
1. It is suitable for the interface treatment on the various ceramic tiles, and marbles which used QL-NO.3 and QL-Silicone Base Transparent Water Repellent Coating.
2. Application substrates: polished tiles, cement floors, antique tiles, glazed tiles, granite, full-body tiles, stone floors, vitrified tiles, artificial marbles and natural marbles.
Application Method
1. Clean the surface of ceramic tile or marble to ensure that it is free of oil and no visible water. It needs to be cleaned up if there is polishing wax on the substrate surface.
2. Use the special tools to apply QL-Interface Agent For Ceramic Tile evenly to ensure that has a certain thickness.
3. Rinse the floor with plenty of water after 30 minutes.
4. It can be applied QL-NO.3 and QL-Silicone Base Transparent Water Repellent Coating after the ground is dry.
1. Clean the surface of ceramic tile or marble to ensure that it is free of oil and no visible water. It needs to be cleaned up if there is polishing wax on the substrate surface.
2. Use the special tools to apply QL-Interface Agent For Ceramic Tile evenly to ensure that has a certain thickness.
3. Rinse the floor with plenty of water after 30 minutes.
4. It can be applied QL-NO.3 and QL-Silicone Base Transparent Water Repellent Coating after the ground is dry.
