- Introduction
QL-Silicone Base Transparent Water Repellent Coating is a colourless, transparent, weather-resistant, environmental-friendly and water-resistant product. It is made up of a new type of high molecular weight polymers with a variety of auxiliary agents from the curing agent.
- Features
1. Safety and environmental protection: After contact with the skin, you should clean with detergent, soap, or washing or washing powder timely.
2. Good adhesion and high transparency: coating will not destroy the decorative effect of the original substrate.
3. Water-tolerant, weather-resistance, resistant to high and low temperature changes. It can be applied for outdoors without discoloration.
4. Antiskid, antifouling and wear-resistant: The coating has excellent antiskid and anti-fouling effect. The adhering dirt can be removed easily.
5. Repairability: Use 800-1200 Mesh sandpaper to polish the edge of the damaged part, and then the damaged area can be repaired.
6. Easy to use: Low viscosity (The paste is also in low viscosity state during construction).
7. Low consumption: in general 80g/m2, but in special circumstances, we should depends on the specific.
8. Construction time limit: more than 2 hours
- Application Ranges:
Indoor and outdoor tile surface for various buildings: kitchen, washrooms, bathroom, fish ponds, landscape pools, balconies, etc.
Application Methods:
1. Clean the surface of substrate: Before coating, the surface of the substrates can be cleaned with water, rags, gauze, etc. To keep the surface clean and free of oil, no dust, dry or wet but no visible water. Tile seams can be treated with talcum powder.
2. Coating preparation: Pour component B into component A and mix well before use.
3. Coating: Generally, it can be brushed twice, and the brushing direction should be crisscross, roller coating, or spray coating.
1. Clean the surface of substrate: Before coating, the surface of the substrates can be cleaned with water, rags, gauze, etc. To keep the surface clean and free of oil, no dust, dry or wet but no visible water. Tile seams can be treated with talcum powder.
2. Coating preparation: Pour component B into component A and mix well before use.
3. Coating: Generally, it can be brushed twice, and the brushing direction should be crisscross, roller coating, or spray coating.
