Qinglong Waterproofing Malaysia
Polyurethane waterproof

CQ108- K11 Polymer Cement Waterproof Coating

  • Introduction:
    CQ108 is a two components waterproof material which key raw materials is organic liquid and inorganic powder made from the advanced Germany technology.
  • Product Features:
    1. It can be used to make decorative layer, non-toxic and tasteless, and can be used for water proofing of the food pool.

    2. It is suitable for the waterproof of the exterior wall and inclined roof of the decorative material, which can be firmly bonded to the outer layers of the base surface, roof tile and cement mortar.

    3. High temperature, especially suitable for road and bridge waterproof; Adjust mix ratio, can make sea ling material.
  • Applications:
    Industrial buildings of roof, kitchen, wall, basement, swimming pool, tank, etc.

1. The base surface requires flat, strong, clean and no water.

2. Exact ingredients: when used, only the powder will be added slowly to the corresponding mixture, and the mixture should be fully stirred to the uniform and fine without the pellets, and the liquid material: powder = 6:19.

3. Coating main point: To be covered by roller or brush, and to be completed according to the selected work order; If the paint (especially the base material) has a precipitate, it should be stirred immediately and evenly. The coating is as uniform as possible and cannot be deposited locally.

4. The time between each layer of the brush between each layer is dry solid.

5. Reference dosage: 1.5kg/m squared~ 2.0kg/m squared (1.0mm thickness).
    • Technical Index:
      Standard: JC/T2090-2011
      The experimental project Technical indicators
      Permeability pressure ≥ 0.5 MPa
      The compressive strength 12.0 MPa
      Bond strength (non-treatment) ≥ 0.7MPa